Fire safety and electrical safety are one problem
It’s tempting to treat the fire NOC and the electrical system as separate boxes to tick. They aren’t. Most building fires start as an electrical fault — an overloaded circuit, a loose joint, a failed breaker, an overheating AC. The fire-safety systems (alarms, extinguishers, hydrants, exits) are what save lives after ignition. To be genuinely safe, a building needs both:
-
- The electrical side stops the fire from starting.
-
- The fire side contains it and gets people out if it does.
Tajalli Tech provides both — electrical safety audits and fire-safety systems — so you don’t stitch together two vendors and hope the gaps are covered.
The combined checklist for building owners
Electrical (prevent the fire)
-
- Thermography of all panels, joints and AC circuits to find hot spots — live, no shutdown. See thermography.
-
- Breaker & protection testing — do the MCBs/RCBOs/ACBs actually trip in time?
-
- Earthing & insulation tested to IS 3043 / IS 732. See earthing.
-
- Load review — is old wiring carrying new AC, server or EV load it was never sized for?
Fire (save lives if it starts)
-
- Clear, unobstructed and adequate exits and staircases — the single biggest factor in the Lucknow toll.
-
- Working fire alarm and smoke detection.
-
- Serviced, in-date fire extinguishers (ABC, CO₂) and a hydrant system where required.
-
- A practised evacuation plan and signage.
In Lucknow, most victims didn’t die of burns — they died of smoke, trapped above a fire that started below. Prevention and escape both failed.
Who is in the spotlight right now
-
- Coaching centres, libraries & schools — especially on upper floors, the focus of the current UP drive.
-
- Hospitals, clinics & labs — critical loads, oxygen, and patients who cannot evacuate quickly.
-
- Hotels, malls & commercial buildings — high occupancy, heavy AC load.
-
- Factories & warehouses — high load, valuable assets, insurance exposure.
Get ahead of the notice
The fastest first step is to book an electrical safety audit — our engineer visits your building, runs the electrical checks above, and hands you a documented Red/Amber/Green report. From there we scope the fire-safety systems you need. We’re based in Aliganj, Lucknow and cover Kanpur, Varanasi, Bareilly and all of UP.
Frequently asked questions
The fire audit checks exits, alarms, extinguishers and hydrants. The electrical audit checks the wiring, panels, earthing and hot spots that usually start the fire. You need both — and we do both.
Yes. The state is actively inspecting and sealing non-compliant centres. A combined fire + electrical audit is the way to get safe and stay open.
Yes — Tajalli Tech provides electrical safety audits, thermography, and fire-safety systems (alarms, extinguishers, hydrants) under one roof.
Call +91 76070 78408 — we mobilise across Lucknow and UP quickly and can book an audit visit within days.
FAQ
A fire safety audit checks exits, alarms, extinguishers, hydrants and evacuation readiness. An electrical safety audit checks the wiring, panels, earthing, breakers and hot spots that most often start the fire in the first place. Because most building fires begin as electrical faults, the two belong together — Tajalli Tech provides both.
Following the Lucknow fire, the UP government launched a drive against coaching centres operating without proper safety standards and has sealed many that fell short. Any centre, especially one on upper floors, should get a combined fire and electrical safety audit immediately.
Clear and adequate exits, working fire alarms and smoke detection, serviced extinguishers and a fire-hydrant system where required, plus the electrical side: thermography for hot spots, breaker and earthing tests, and a load review. The electrical checks are what prevent the fire; the fire systems are what save lives if one starts.